Logo Search packages:      
Sourcecode: linux-2.6 version File versions

board-apollon.c

/*
 * linux/arch/arm/mach-omap/omap2/board-apollon.c
 *
 * Copyright (C) 2005,2006 Samsung Electronics
 * Author: Kyungmin Park <kyungmin.park@samsung.com>
 *
 * Modified from mach-omap/omap2/board-h4.c
 *
 * Code for apollon OMAP2 board. Should work on many OMAP2 systems where
 * the bootloader passes the board-specific data to the kernel.
 * Do not put any board specific code to this file; create a new machine
 * type if you need custom low-level initializations.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
#include <linux/delay.h>

#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>

#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
#include "prcm-regs.h"

/* LED & Switch macros */
#define LED0_GPIO13           13
#define LED1_GPIO14           14
#define LED2_GPIO15           15
#define SW_ENTER_GPIO16       16
#define SW_UP_GPIO17          17
#define SW_DOWN_GPIO58        58

static struct mtd_partition apollon_partitions[] = {
      {
            .name       = "X-Loader + U-Boot",
            .offset           = 0,
            .size       = SZ_128K,
            .mask_flags = MTD_WRITEABLE,
      },
      {
            .name       = "params",
            .offset           = MTDPART_OFS_APPEND,
            .size       = SZ_128K,
      },
      {
            .name       = "kernel",
            .offset           = MTDPART_OFS_APPEND,
            .size       = SZ_2M,
      },
      {
            .name       = "rootfs",
            .offset           = MTDPART_OFS_APPEND,
            .size       = SZ_16M,
      },
      {
            .name       = "filesystem00",
            .offset           = MTDPART_OFS_APPEND,
            .size       = SZ_32M,
      },
      {
            .name       = "filesystem01",
            .offset           = MTDPART_OFS_APPEND,
            .size       = MTDPART_SIZ_FULL,
      },
};

static struct flash_platform_data apollon_flash_data = {
      .parts            = apollon_partitions,
      .nr_parts   = ARRAY_SIZE(apollon_partitions),
};

static struct resource apollon_flash_resource = {
      .start            = APOLLON_CS0_BASE,
      .end        = APOLLON_CS0_BASE + SZ_128K,
      .flags            = IORESOURCE_MEM,
};

static struct platform_device apollon_onenand_device = {
      .name       = "onenand",
      .id         = -1,
      .dev        = {
            .platform_data    = &apollon_flash_data,
      },
      .num_resources    = ARRAY_SIZE(&apollon_flash_resource),
      .resource   = &apollon_flash_resource,
};

static struct resource apollon_smc91x_resources[] = {
      [0] = {
            .start      = APOLLON_ETHR_START,         /* Physical */
            .end  = APOLLON_ETHR_START + 0xf,
            .flags  = IORESOURCE_MEM,
      },
      [1] = {
            .start      = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
            .end  = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
            .flags      = IORESOURCE_IRQ,
      },
};

static struct platform_device apollon_smc91x_device = {
      .name       = "smc91x",
      .id         = -1,
      .num_resources    = ARRAY_SIZE(apollon_smc91x_resources),
      .resource   = apollon_smc91x_resources,
};

static struct platform_device apollon_lcd_device = {
      .name       = "apollon_lcd",
      .id         = -1,
};

static struct platform_device *apollon_devices[] __initdata = {
      &apollon_onenand_device,
      &apollon_smc91x_device,
      &apollon_lcd_device,
};

static inline void __init apollon_init_smc91x(void)
{
      /* Make sure CS1 timings are correct */
      GPMC_CONFIG1_1 = 0x00011203;
      GPMC_CONFIG2_1 = 0x001f1f01;
      GPMC_CONFIG3_1 = 0x00080803;
      GPMC_CONFIG4_1 = 0x1c091c09;
      GPMC_CONFIG5_1 = 0x041f1f1f;
      GPMC_CONFIG6_1 = 0x000004c4;
      GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24);
      udelay(100);

      omap_cfg_reg(W4__24XX_GPIO74);
      if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
            printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
                  APOLLON_ETHR_GPIO_IRQ);
            return;
      }
      omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
}

static void __init omap_apollon_init_irq(void)
{
      omap2_init_common_hw();
      omap_init_irq();
      omap_gpio_init();
      apollon_init_smc91x();
}

static struct omap_uart_config apollon_uart_config __initdata = {
      .enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};

static struct omap_mmc_config apollon_mmc_config __initdata = {
      .mmc [0] = {
            .enabled    = 0,
            .wire4            = 0,
            .wp_pin           = -1,
            .power_pin  = -1,
            .switch_pin = -1,
      },
};

static struct omap_lcd_config apollon_lcd_config __initdata = {
      .ctrl_name  = "internal",
};

static struct omap_board_config_kernel apollon_config[] = {
      { OMAP_TAG_UART,  &apollon_uart_config },
      { OMAP_TAG_MMC,         &apollon_mmc_config },
      { OMAP_TAG_LCD,         &apollon_lcd_config },
};

static void __init apollon_led_init(void)
{
      /* LED0 - AA10 */
      omap_cfg_reg(AA10_242X_GPIO13);
      omap_request_gpio(LED0_GPIO13);
      omap_set_gpio_direction(LED0_GPIO13, 0);
      omap_set_gpio_dataout(LED0_GPIO13, 0);
      /* LED1  - AA6 */
      omap_cfg_reg(AA6_242X_GPIO14);
      omap_request_gpio(LED1_GPIO14);
      omap_set_gpio_direction(LED1_GPIO14, 0);
      omap_set_gpio_dataout(LED1_GPIO14, 0);
      /* LED2  - AA4 */
      omap_cfg_reg(AA4_242X_GPIO15);
      omap_request_gpio(LED2_GPIO15);
      omap_set_gpio_direction(LED2_GPIO15, 0);
      omap_set_gpio_dataout(LED2_GPIO15, 0);
}

static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs)
{
      static unsigned int led0, led1, led2;

      if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
            omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
      else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
            omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
      else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
            omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);

      return IRQ_HANDLED;
}

static void __init apollon_sw_init(void)
{
      /* Enter SW - Y11 */
      omap_cfg_reg(Y11_242X_GPIO16);
      omap_request_gpio(SW_ENTER_GPIO16);
      omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
      /* Up SW - AA12 */
      omap_cfg_reg(AA12_242X_GPIO17);
      omap_request_gpio(SW_UP_GPIO17);
      omap_set_gpio_direction(SW_UP_GPIO17, 1);
      /* Down SW - AA8 */
      omap_cfg_reg(AA8_242X_GPIO58);
      omap_request_gpio(SW_DOWN_GPIO58);
      omap_set_gpio_direction(SW_DOWN_GPIO58, 1);

      set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
      if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
                        IRQF_SHARED, "enter sw",
                        &apollon_sw_interrupt))
            return;
      set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
      if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
                        IRQF_SHARED, "up sw",
                        &apollon_sw_interrupt))
            return;
      set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
      if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
                        IRQF_SHARED, "down sw",
                        &apollon_sw_interrupt))
            return;
}

static void __init omap_apollon_init(void)
{
      apollon_led_init();
      apollon_sw_init();

      /* REVISIT: where's the correct place */
      omap_cfg_reg(W19_24XX_SYS_NIRQ);

      /*
       * Make sure the serial ports are muxed on at this point.
       * You have to mux them off in device drivers later on
       * if not needed.
       */
      platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
      omap_board_config = apollon_config;
      omap_board_config_size = ARRAY_SIZE(apollon_config);
      omap_serial_init();
}

static void __init omap_apollon_map_io(void)
{
      omap2_map_common_io();
}

MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
      /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
      .phys_io    = 0x48000000,
      .io_pg_offst      = ((0xd8000000) >> 18) & 0xfffc,
      .boot_params      = 0x80000100,
      .map_io           = omap_apollon_map_io,
      .init_irq   = omap_apollon_init_irq,
      .init_machine     = omap_apollon_init,
      .timer            = &omap_timer,
MACHINE_END

Generated by  Doxygen 1.6.0   Back to index