Logo Search packages:      
Sourcecode: linux-2.6 version File versions

clock34xx.c

/*
 * OMAP3-specific clock framework functions
 *
 * Copyright (C) 2007 Texas Instruments, Inc.
 * Copyright (C) 2007 Nokia Corporation
 *
 * Written by Paul Walmsley
 *
 * Parts of this code are based on code written by
 * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#undef DEBUG

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>

#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/div64.h>
#include <asm/bitops.h>

#include "memory.h"
#include "clock.h"
#include "clock34xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"

/* CM_CLKEN_PLL*.EN* bit values */
#define DPLL_LOCKED           0x7

/**
 * omap3_dpll_recalc - recalculate DPLL rate
 * @clk: DPLL struct clk
 *
 * Recalculate and propagate the DPLL rate.
 */
static void omap3_dpll_recalc(struct clk *clk)
{
      clk->rate = omap2_get_dpll_rate(clk);

      propagate_rate(clk);
}

/**
 * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
 * @clk: DPLL output struct clk
 *
 * Using parent clock DPLL data, look up DPLL state.  If locked, set our
 * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
 */
static void omap3_clkoutx2_recalc(struct clk *clk)
{
      const struct dpll_data *dd;
      u32 v;
      struct clk *pclk;

      /* Walk up the parents of clk, looking for a DPLL */
      pclk = clk->parent;
      while (pclk && !pclk->dpll_data)
            pclk = pclk->parent;

      /* clk does not have a DPLL as a parent? */
      WARN_ON(!pclk);

      dd = pclk->dpll_data;

      WARN_ON(!dd->control_reg || !dd->enable_mask);

      v = __raw_readl(dd->control_reg) & dd->enable_mask;
      v >>= __ffs(dd->enable_mask);
      if (v != DPLL_LOCKED)
            clk->rate = clk->parent->rate;
      else
            clk->rate = clk->parent->rate * 2;

      if (clk->flags & RATE_PROPAGATES)
            propagate_rate(clk);
}

/*
 * As it is structured now, this will prevent an OMAP2/3 multiboot
 * kernel from compiling.  This will need further attention.
 */
#if defined(CONFIG_ARCH_OMAP3)

static struct clk_functions omap2_clk_functions = {
      .clk_enable       = omap2_clk_enable,
      .clk_disable            = omap2_clk_disable,
      .clk_round_rate         = omap2_clk_round_rate,
      .clk_set_rate           = omap2_clk_set_rate,
      .clk_set_parent         = omap2_clk_set_parent,
      .clk_disable_unused     = omap2_clk_disable_unused,
};

/*
 * Set clocks for bypass mode for reboot to work.
 */
void omap2_clk_prepare_for_reboot(void)
{
      /* REVISIT: Not ready for 343x */
#if 0
      u32 rate;

      if (vclk == NULL || sclk == NULL)
            return;

      rate = clk_get_rate(sclk);
      clk_set_rate(vclk, rate);
#endif
}

/* REVISIT: Move this init stuff out into clock.c */

/*
 * Switch the MPU rate if specified on cmdline.
 * We cannot do this early until cmdline is parsed.
 */
static int __init omap2_clk_arch_init(void)
{
      if (!mpurate)
            return -EINVAL;

      /* REVISIT: not yet ready for 343x */
#if 0
      if (omap2_select_table_rate(&virt_prcm_set, mpurate))
            printk(KERN_ERR "Could not find matching MPU rate\n");
#endif

      recalculate_root_clocks();

      printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
             "%ld.%01ld/%ld/%ld MHz\n",
             (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
             (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;

      return 0;
}
arch_initcall(omap2_clk_arch_init);

int __init omap2_clk_init(void)
{
      /* struct prcm_config *prcm; */
      struct clk **clkp;
      /* u32 clkrate; */
      u32 cpu_clkflg;

      /* REVISIT: Ultimately this will be used for multiboot */
#if 0
      if (cpu_is_omap242x()) {
            cpu_mask = RATE_IN_242X;
            cpu_clkflg = CLOCK_IN_OMAP242X;
            clkp = onchip_24xx_clks;
      } else if (cpu_is_omap2430()) {
            cpu_mask = RATE_IN_243X;
            cpu_clkflg = CLOCK_IN_OMAP243X;
            clkp = onchip_24xx_clks;
      }
#endif
      if (cpu_is_omap34xx()) {
            cpu_mask = RATE_IN_343X;
            cpu_clkflg = CLOCK_IN_OMAP343X;
            clkp = onchip_34xx_clks;

            /*
             * Update this if there are further clock changes between ES2
             * and production parts
             */
            if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) {
                  /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
                  cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
            } else {
                  cpu_mask |= RATE_IN_3430ES2;
                  cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
            }
      }

      clk_init(&omap2_clk_functions);

      for (clkp = onchip_34xx_clks;
           clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
           clkp++) {
            if ((*clkp)->flags & cpu_clkflg)
                  clk_register(*clkp);
      }

      /* REVISIT: Not yet ready for OMAP3 */
#if 0
      /* Check the MPU rate set by bootloader */
      clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
      for (prcm = rate_table; prcm->mpu_speed; prcm++) {
            if (!(prcm->flags & cpu_mask))
                  continue;
            if (prcm->xtal_speed != sys_ck.rate)
                  continue;
            if (prcm->dpll_speed <= clkrate)
                   break;
      }
      curr_prcm_set = prcm;
#endif

      recalculate_root_clocks();

      printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
             "%ld.%01ld/%ld/%ld MHz\n",
             (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
             (core_ck.rate / 1000000), (arm_fck.rate / 1000000));

      /*
       * Only enable those clocks we will need, let the drivers
       * enable other clocks as necessary
       */
      clk_enable_init_clocks();

      /* Avoid sleeping during omap2_clk_prepare_for_reboot() */
      /* REVISIT: not yet ready for 343x */
#if 0
      vclk = clk_get(NULL, "virt_prcm_set");
      sclk = clk_get(NULL, "sys_ck");
#endif
      return 0;
}

#endif

Generated by  Doxygen 1.6.0   Back to index