Logo Search packages:      
Sourcecode: linux-2.6 version File versions

db88f5281-setup.c

/*
 * arch/arm/mach-orion5x/db88f5281-setup.c
 *
 * Marvell Orion-2 Development Board Setup
 *
 * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <asm/arch/orion5x.h>
#include <asm/plat-orion/orion_nand.h>
#include "common.h"

/*****************************************************************************
 * DB-88F5281 on board devices
 ****************************************************************************/

/*
 * 512K NOR flash Device bus boot chip select
 */

#define DB88F5281_NOR_BOOT_BASE           0xf4000000
#define DB88F5281_NOR_BOOT_SIZE           SZ_512K

/*
 * 7-Segment on Device bus chip select 0
 */

#define DB88F5281_7SEG_BASE         0xfa000000
#define DB88F5281_7SEG_SIZE         SZ_1K

/*
 * 32M NOR flash on Device bus chip select 1
 */

#define DB88F5281_NOR_BASE          0xfc000000
#define DB88F5281_NOR_SIZE          SZ_32M

/*
 * 32M NAND flash on Device bus chip select 2
 */

#define DB88F5281_NAND_BASE         0xfa800000
#define DB88F5281_NAND_SIZE         SZ_1K

/*
 * PCI
 */

#define DB88F5281_PCI_SLOT0_OFFS          7
#define DB88F5281_PCI_SLOT0_IRQ_PIN       12
#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13

/*****************************************************************************
 * 512M NOR Flash on Device bus Boot CS
 ****************************************************************************/

static struct physmap_flash_data db88f5281_boot_flash_data = {
      .width            = 1,  /* 8 bit bus width */
};

static struct resource db88f5281_boot_flash_resource = {
      .flags            = IORESOURCE_MEM,
      .start            = DB88F5281_NOR_BOOT_BASE,
      .end        = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
};

static struct platform_device db88f5281_boot_flash = {
      .name       = "physmap-flash",
      .id         = 0,
      .dev        = {
            .platform_data = &db88f5281_boot_flash_data,
      },
      .num_resources    = 1,
      .resource   = &db88f5281_boot_flash_resource,
};

/*****************************************************************************
 * 32M NOR Flash on Device bus CS1
 ****************************************************************************/

static struct physmap_flash_data db88f5281_nor_flash_data = {
      .width            = 4,  /* 32 bit bus width */
};

static struct resource db88f5281_nor_flash_resource = {
      .flags            = IORESOURCE_MEM,
      .start            = DB88F5281_NOR_BASE,
      .end        = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
};

static struct platform_device db88f5281_nor_flash = {
      .name       = "physmap-flash",
      .id         = 1,
      .dev        = {
            .platform_data = &db88f5281_nor_flash_data,
      },
      .num_resources    = 1,
      .resource   = &db88f5281_nor_flash_resource,
};

/*****************************************************************************
 * 32M NAND Flash on Device bus CS2
 ****************************************************************************/

static struct mtd_partition db88f5281_nand_parts[] = {
      {
            .name = "kernel",
            .offset = 0,
            .size = SZ_2M,
      },
      {
            .name = "root",
            .offset = SZ_2M,
            .size = (SZ_16M - SZ_2M),
      },
      {
            .name = "user",
            .offset = SZ_16M,
            .size = SZ_8M,
      },
      {
            .name = "recovery",
            .offset = (SZ_16M + SZ_8M),
            .size = SZ_8M,
      },
};

static struct resource db88f5281_nand_resource = {
      .flags            = IORESOURCE_MEM,
      .start            = DB88F5281_NAND_BASE,
      .end        = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
};

static struct orion_nand_data db88f5281_nand_data = {
      .parts            = db88f5281_nand_parts,
      .nr_parts   = ARRAY_SIZE(db88f5281_nand_parts),
      .cle        = 0,
      .ale        = 1,
      .width            = 8,
};

static struct platform_device db88f5281_nand_flash = {
      .name       = "orion_nand",
      .id         = -1,
      .dev        = {
            .platform_data    = &db88f5281_nand_data,
      },
      .resource   = &db88f5281_nand_resource,
      .num_resources    = 1,
};

/*****************************************************************************
 * 7-Segment on Device bus CS0
 * Dummy counter every 2 sec
 ****************************************************************************/

static void __iomem *db88f5281_7seg;
static struct timer_list db88f5281_timer;

static void db88f5281_7seg_event(unsigned long data)
{
      static int count = 0;
      writel(0, db88f5281_7seg + (count << 4));
      count = (count + 1) & 7;
      mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
}

static int __init db88f5281_7seg_init(void)
{
      if (machine_is_db88f5281()) {
            db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
                              DB88F5281_7SEG_SIZE);
            if (!db88f5281_7seg) {
                  printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
                  return -EIO;
            }
            setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
            mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
      }

      return 0;
}

__initcall(db88f5281_7seg_init);

/*****************************************************************************
 * PCI
 ****************************************************************************/

void __init db88f5281_pci_preinit(void)
{
      int pin;

      /*
       * Configure PCI GPIO IRQ pins
       */
      pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
      if (gpio_request(pin, "PCI Int1") == 0) {
            if (gpio_direction_input(pin) == 0) {
                  set_irq_type(gpio_to_irq(pin), IRQT_LOW);
            } else {
                  printk(KERN_ERR "db88f5281_pci_preinit faield to "
                              "set_irq_type pin %d\n", pin);
                  gpio_free(pin);
            }
      } else {
            printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
      }

      pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
      if (gpio_request(pin, "PCI Int2") == 0) {
            if (gpio_direction_input(pin) == 0) {
                  set_irq_type(gpio_to_irq(pin), IRQT_LOW);
            } else {
                  printk(KERN_ERR "db88f5281_pci_preinit faield "
                              "to set_irq_type pin %d\n", pin);
                  gpio_free(pin);
            }
      } else {
            printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
      }
}

static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
      int irq;

      /*
       * Check for devices with hard-wired IRQs.
       */
      irq = orion5x_pci_map_irq(dev, slot, pin);
      if (irq != -1)
            return irq;

      /*
       * PCI IRQs are connected via GPIOs.
       */
      switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
      case 0:
            return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
      case 1:
      case 2:
            return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
      default:
            return -1;
      }
}

static struct hw_pci db88f5281_pci __initdata = {
      .nr_controllers   = 2,
      .preinit    = db88f5281_pci_preinit,
      .swizzle    = pci_std_swizzle,
      .setup            = orion5x_pci_sys_setup,
      .scan       = orion5x_pci_sys_scan_bus,
      .map_irq    = db88f5281_pci_map_irq,
};

static int __init db88f5281_pci_init(void)
{
      if (machine_is_db88f5281())
            pci_common_init(&db88f5281_pci);

      return 0;
}

subsys_initcall(db88f5281_pci_init);

/*****************************************************************************
 * Ethernet
 ****************************************************************************/
static struct mv643xx_eth_platform_data db88f5281_eth_data = {
      .phy_addr   = 8,
      .force_phy_addr = 1,
};

/*****************************************************************************
 * RTC DS1339 on I2C bus
 ****************************************************************************/
static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
      I2C_BOARD_INFO("ds1339", 0x68),
};

/*****************************************************************************
 * General Setup
 ****************************************************************************/

static struct platform_device *db88f5281_devs[] __initdata = {
      &db88f5281_boot_flash,
      &db88f5281_nor_flash,
      &db88f5281_nand_flash,
};

static void __init db88f5281_init(void)
{
      /*
       * Basic Orion setup. Need to be called early.
       */
      orion5x_init();

      /*
       * Setup the CPU address decode windows for our on-board devices
       */
      orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
                        DB88F5281_NOR_BOOT_SIZE);
      orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
      orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
      orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);

      /*
       * Setup Multiplexing Pins:
       * MPP0: GPIO (USB Over Current)    MPP1: GPIO (USB Vbat input)
       * MPP2: PCI_REQn[2]                MPP3: PCI_GNTn[2]
       * MPP4: PCI_REQn[3]                MPP5: PCI_GNTn[3]
       * MPP6: GPIO (JP0, CON17.2)        MPP7: GPIO (JP1, CON17.1)
       * MPP8: GPIO (JP2, CON11.2)        MPP9: GPIO (JP3, CON11.3)
       * MPP10: GPIO (RTC int)            MPP11: GPIO (Baud Rate Generator)
       * MPP12: GPIO (PCI int 1)          MPP13: GPIO (PCI int 2)
       * MPP14: NAND_REn[2]               MPP15: NAND_WEn[2]
       * MPP16: UART1_RX                  MPP17: UART1_TX
       * MPP18: UART1_CTS                 MPP19: UART1_RTS
       * MPP-DEV: DEV_D[16:31]
       */
      orion5x_write(MPP_0_7_CTRL, 0x00222203);
      orion5x_write(MPP_8_15_CTRL, 0x44000000);
      orion5x_write(MPP_16_19_CTRL, 0);
      orion5x_write(MPP_DEV_CTRL, 0);

      orion5x_gpio_set_valid_pins(0x00003fc3);

      platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
      i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
      orion5x_eth_init(&db88f5281_eth_data);
}

MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
      /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
      .phys_io    = ORION5X_REGS_PHYS_BASE,
      .io_pg_offst      = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = 0x00000100,
      .init_machine     = db88f5281_init,
      .map_io           = orion5x_map_io,
      .init_irq   = orion5x_init_irq,
      .timer            = &orion5x_timer,
MACHINE_END

Generated by  Doxygen 1.6.0   Back to index