Logo Search packages:      
Sourcecode: linux-2.6 version File versions

dma.c

/*
 * linux/arch/arm/plat-omap/dma.c
 *
 * Copyright (C) 2003 Nokia Corporation
 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
 * Graphics DMA and LCD DMA graphics tranformations
 * by Imre Deak <imre.deak@nokia.com>
 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
 *
 * Support functions for the OMAP internal DMA channels.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>

#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/dma.h>
#include <asm/io.h>

#include <asm/arch/tc.h>

#undef DEBUG

#ifndef CONFIG_ARCH_OMAP1
enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
      DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
};

enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
#endif

#define OMAP_DMA_ACTIVE       0x01
#define OMAP_DMA_CCR_EN       (1 << 7)
#define OMAP2_DMA_CSR_CLEAR_MASK    0xffe

#define OMAP_FUNC_MUX_ARM_BASE      (0xfffe1000 + 0xec)

static int enable_1510_mode = 0;

struct omap_dma_lch {
      int next_lch;
      int dev_id;
      u16 saved_csr;
      u16 enabled_irqs;
      const char *dev_name;
      void (* callback)(int lch, u16 ch_status, void *data);
      void *data;

#ifndef CONFIG_ARCH_OMAP1
      /* required for Dynamic chaining */
      int prev_linked_ch;
      int next_linked_ch;
      int state;
      int chain_id;

      int status;
#endif
      long flags;
};

#ifndef CONFIG_ARCH_OMAP1
struct dma_link_info {
      int *linked_dmach_q;
      int no_of_lchs_linked;

      int q_count;
      int q_tail;
      int q_head;

      int chain_state;
      int chain_mode;

};

static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];

/* Chain handling macros */
#define OMAP_DMA_CHAIN_QINIT(chain_id)                            \
      do {                                            \
            dma_linked_lch[chain_id].q_head =               \
            dma_linked_lch[chain_id].q_tail =               \
            dma_linked_lch[chain_id].q_count = 0;                 \
      } while (0)
#define OMAP_DMA_CHAIN_QFULL(chain_id)                            \
            (dma_linked_lch[chain_id].no_of_lchs_linked ==        \
            dma_linked_lch[chain_id].q_count)
#define OMAP_DMA_CHAIN_QLAST(chain_id)                            \
      do {                                            \
            ((dma_linked_lch[chain_id].no_of_lchs_linked-1) ==    \
            dma_linked_lch[chain_id].q_count)               \
      } while (0)
#define OMAP_DMA_CHAIN_QEMPTY(chain_id)                           \
            (0 == dma_linked_lch[chain_id].q_count)
#define __OMAP_DMA_CHAIN_INCQ(end)                          \
      ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
#define OMAP_DMA_CHAIN_INCQHEAD(chain_id)                   \
      do {                                            \
            __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head);     \
            dma_linked_lch[chain_id].q_count--;             \
      } while (0)

#define OMAP_DMA_CHAIN_INCQTAIL(chain_id)                   \
      do {                                            \
            __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail);     \
            dma_linked_lch[chain_id].q_count++; \
      } while (0)
#endif
static int dma_chan_count;

static spinlock_t dma_chan_lock;
static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];

static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
      INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
      INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
      INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
      INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
      INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
};

static inline void disable_lnk(int lch);
static void omap_disable_channel_irq(int lch);
static inline void omap_enable_channel_irq(int lch);

#define REVISIT_24XX()        printk(KERN_ERR "FIXME: no %s on 24xx\n", \
                                    __func__);

#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
int omap_dma_in_1510_mode(void)
{
      return enable_1510_mode;
}
#else
#define omap_dma_in_1510_mode()           0
#endif

#ifdef CONFIG_ARCH_OMAP1
static inline int get_gdma_dev(int req)
{
      u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
      int shift = ((req - 1) % 5) * 6;

      return ((omap_readl(reg) >> shift) & 0x3f) + 1;
}

static inline void set_gdma_dev(int req, int dev)
{
      u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
      int shift = ((req - 1) % 5) * 6;
      u32 l;

      l = omap_readl(reg);
      l &= ~(0x3f << shift);
      l |= (dev - 1) << shift;
      omap_writel(l, reg);
}
#else
#define set_gdma_dev(req, dev)      do {} while (0)
#endif

static void clear_lch_regs(int lch)
{
      int i;
      u32 lch_base = OMAP_DMA_BASE + lch * 0x40;

      for (i = 0; i < 0x2c; i += 2)
            omap_writew(0, lch_base + i);
}

void omap_set_dma_priority(int lch, int dst_port, int priority)
{
      unsigned long reg;
      u32 l;

      if (cpu_class_is_omap1()) {
            switch (dst_port) {
            case OMAP_DMA_PORT_OCP_T1:    /* FFFECC00 */
                  reg = OMAP_TC_OCPT1_PRIOR;
                  break;
            case OMAP_DMA_PORT_OCP_T2:    /* FFFECCD0 */
                  reg = OMAP_TC_OCPT2_PRIOR;
                  break;
            case OMAP_DMA_PORT_EMIFF:     /* FFFECC08 */
                  reg = OMAP_TC_EMIFF_PRIOR;
                  break;
            case OMAP_DMA_PORT_EMIFS:     /* FFFECC04 */
                  reg = OMAP_TC_EMIFS_PRIOR;
                  break;
            default:
                  BUG();
                  return;
            }
            l = omap_readl(reg);
            l &= ~(0xf << 8);
            l |= (priority & 0xf) << 8;
            omap_writel(l, reg);
      }

      if (cpu_class_is_omap2()) {
            if (priority)
                  OMAP_DMA_CCR_REG(lch) |= (1 << 6);
            else
                  OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
      }
}

void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
                          int frame_count, int sync_mode,
                          int dma_trigger, int src_or_dst_synch)
{
      OMAP_DMA_CSDP_REG(lch) &= ~0x03;
      OMAP_DMA_CSDP_REG(lch) |= data_type;

      if (cpu_class_is_omap1()) {
            OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
            if (sync_mode == OMAP_DMA_SYNC_FRAME)
                  OMAP_DMA_CCR_REG(lch) |= 1 << 5;

            OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
            if (sync_mode == OMAP_DMA_SYNC_BLOCK)
                  OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
      }

      if (cpu_class_is_omap2() && dma_trigger) {
            u32 val = OMAP_DMA_CCR_REG(lch);

            val &= ~(3 << 19);
            if (dma_trigger > 63)
                  val |= 1 << 20;
            if (dma_trigger > 31)
                  val |= 1 << 19;

            val &= ~(0x1f);
            val |= (dma_trigger & 0x1f);

            if (sync_mode & OMAP_DMA_SYNC_FRAME)
                  val |= 1 << 5;
            else
                  val &= ~(1 << 5);

            if (sync_mode & OMAP_DMA_SYNC_BLOCK)
                  val |= 1 << 18;
            else
                  val &= ~(1 << 18);

            if (src_or_dst_synch)
                  val |= 1 << 24;         /* source synch */
            else
                  val &= ~(1 << 24);      /* dest synch */

            OMAP_DMA_CCR_REG(lch) = val;
      }

      OMAP_DMA_CEN_REG(lch) = elem_count;
      OMAP_DMA_CFN_REG(lch) = frame_count;
}

void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
      u16 w;

      BUG_ON(omap_dma_in_1510_mode());

      if (cpu_class_is_omap2()) {
            REVISIT_24XX();
            return;
      }

      w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
      switch (mode) {
      case OMAP_DMA_CONSTANT_FILL:
            w |= 0x01;
            break;
      case OMAP_DMA_TRANSPARENT_COPY:
            w |= 0x02;
            break;
      case OMAP_DMA_COLOR_DIS:
            break;
      default:
            BUG();
      }
      OMAP1_DMA_CCR2_REG(lch) = w;

      w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
      /* Default is channel type 2D */
      if (mode) {
            OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
            OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
            w |= 1;           /* Channel type G */
      }
      OMAP1_DMA_LCH_CTRL_REG(lch) = w;
}

void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
      if (cpu_class_is_omap2()) {
            OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
            OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
      }
}

/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
                       unsigned long src_start,
                       int src_ei, int src_fi)
{
      if (cpu_class_is_omap1()) {
            OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
            OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
      }

      OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
      OMAP_DMA_CCR_REG(lch) |= src_amode << 12;

      if (cpu_class_is_omap1()) {
            OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
            OMAP1_DMA_CSSA_L_REG(lch) = src_start;
      }

      if (cpu_class_is_omap2())
            OMAP2_DMA_CSSA_REG(lch) = src_start;

      OMAP_DMA_CSEI_REG(lch) = src_ei;
      OMAP_DMA_CSFI_REG(lch) = src_fi;
}

void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
{
      omap_set_dma_transfer_params(lch, params->data_type,
                             params->elem_count, params->frame_count,
                             params->sync_mode, params->trigger,
                             params->src_or_dst_synch);
      omap_set_dma_src_params(lch, params->src_port,
                        params->src_amode, params->src_start,
                        params->src_ei, params->src_fi);

      omap_set_dma_dest_params(lch, params->dst_port,
                         params->dst_amode, params->dst_start,
                         params->dst_ei, params->dst_fi);
      if (params->read_prio || params->write_prio)
            omap_dma_set_prio_lch(lch, params->read_prio,
                              params->write_prio);
}

void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
      if (cpu_class_is_omap2()) {
            REVISIT_24XX();
            return;
      }
      OMAP_DMA_CSEI_REG(lch) = eidx;
      OMAP_DMA_CSFI_REG(lch) = fidx;
}

void omap_set_dma_src_data_pack(int lch, int enable)
{
      OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
      if (enable)
            OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
}

void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
      unsigned int burst = 0;
      OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);

      switch (burst_mode) {
      case OMAP_DMA_DATA_BURST_DIS:
            break;
      case OMAP_DMA_DATA_BURST_4:
            if (cpu_class_is_omap2())
                  burst = 0x1;
            else
                  burst = 0x2;
            break;
      case OMAP_DMA_DATA_BURST_8:
            if (cpu_class_is_omap2()) {
                  burst = 0x2;
                  break;
            }
            /* not supported by current hardware on OMAP1
             * w |= (0x03 << 7);
             * fall through
             */
      case OMAP_DMA_DATA_BURST_16:
            if (cpu_class_is_omap2()) {
                  burst = 0x3;
                  break;
            }
            /* OMAP1 don't support burst 16
             * fall through
             */
      default:
            BUG();
      }
      OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
}

/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
                        unsigned long dest_start,
                        int dst_ei, int dst_fi)
{
      if (cpu_class_is_omap1()) {
            OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
            OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
      }

      OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
      OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;

      if (cpu_class_is_omap1()) {
            OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
            OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
      }

      if (cpu_class_is_omap2())
            OMAP2_DMA_CDSA_REG(lch) = dest_start;

      OMAP_DMA_CDEI_REG(lch) = dst_ei;
      OMAP_DMA_CDFI_REG(lch) = dst_fi;
}

void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
      if (cpu_class_is_omap2()) {
            REVISIT_24XX();
            return;
      }
      OMAP_DMA_CDEI_REG(lch) = eidx;
      OMAP_DMA_CDFI_REG(lch) = fidx;
}

void omap_set_dma_dest_data_pack(int lch, int enable)
{
      OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
      if (enable)
            OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
}

void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
      unsigned int burst = 0;
      OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);

      switch (burst_mode) {
      case OMAP_DMA_DATA_BURST_DIS:
            break;
      case OMAP_DMA_DATA_BURST_4:
            if (cpu_class_is_omap2())
                  burst = 0x1;
            else
                  burst = 0x2;
            break;
      case OMAP_DMA_DATA_BURST_8:
            if (cpu_class_is_omap2())
                  burst = 0x2;
            else
                  burst = 0x3;
            break;
      case OMAP_DMA_DATA_BURST_16:
            if (cpu_class_is_omap2()) {
                  burst = 0x3;
                  break;
            }
            /* OMAP1 don't support burst 16
             * fall through
             */
      default:
            printk(KERN_ERR "Invalid DMA burst mode\n");
            BUG();
            return;
      }
      OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
}

static inline void omap_enable_channel_irq(int lch)
{
      u32 status;

      /* Clear CSR */
      if (cpu_class_is_omap1())
            status = OMAP_DMA_CSR_REG(lch);
      else if (cpu_class_is_omap2())
            OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;

      /* Enable some nice interrupts. */
      OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
}

static void omap_disable_channel_irq(int lch)
{
      if (cpu_class_is_omap2())
            OMAP_DMA_CICR_REG(lch) = 0;
}

void omap_enable_dma_irq(int lch, u16 bits)
{
      dma_chan[lch].enabled_irqs |= bits;
}

void omap_disable_dma_irq(int lch, u16 bits)
{
      dma_chan[lch].enabled_irqs &= ~bits;
}

static inline void enable_lnk(int lch)
{
      if (cpu_class_is_omap1())
            OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);

      /* Set the ENABLE_LNK bits */
      if (dma_chan[lch].next_lch != -1)
            OMAP_DMA_CLNK_CTRL_REG(lch) =
                  dma_chan[lch].next_lch | (1 << 15);

#ifndef CONFIG_ARCH_OMAP1
      if (dma_chan[lch].next_linked_ch != -1)
            OMAP_DMA_CLNK_CTRL_REG(lch) =
                  dma_chan[lch].next_linked_ch | (1 << 15);
#endif
}

static inline void disable_lnk(int lch)
{
      /* Disable interrupts */
      if (cpu_class_is_omap1()) {
            OMAP_DMA_CICR_REG(lch) = 0;
            /* Set the STOP_LNK bit */
            OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
      }

      if (cpu_class_is_omap2()) {
            omap_disable_channel_irq(lch);
            /* Clear the ENABLE_LNK bit */
            OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
      }

      dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}

static inline void omap2_enable_irq_lch(int lch)
{
      u32 val;

      if (!cpu_class_is_omap2())
            return;

      val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
      val |= 1 << lch;
      omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
}

int omap_request_dma(int dev_id, const char *dev_name,
                 void (* callback)(int lch, u16 ch_status, void *data),
                 void *data, int *dma_ch_out)
{
      int ch, free_ch = -1;
      unsigned long flags;
      struct omap_dma_lch *chan;

      spin_lock_irqsave(&dma_chan_lock, flags);
      for (ch = 0; ch < dma_chan_count; ch++) {
            if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
                  free_ch = ch;
                  if (dev_id == 0)
                        break;
            }
      }
      if (free_ch == -1) {
            spin_unlock_irqrestore(&dma_chan_lock, flags);
            return -EBUSY;
      }
      chan = dma_chan + free_ch;
      chan->dev_id = dev_id;

      if (cpu_class_is_omap1())
            clear_lch_regs(free_ch);

      if (cpu_class_is_omap2())
            omap_clear_dma(free_ch);

      spin_unlock_irqrestore(&dma_chan_lock, flags);

      chan->dev_name = dev_name;
      chan->callback = callback;
      chan->data = data;
#ifndef CONFIG_ARCH_OMAP1
      chan->chain_id = -1;
      chan->next_linked_ch = -1;
#endif
      chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;

      if (cpu_class_is_omap1())
            chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
      else if (cpu_class_is_omap2())
            chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
                  OMAP2_DMA_TRANS_ERR_IRQ;

      if (cpu_is_omap16xx()) {
            /* If the sync device is set, configure it dynamically. */
            if (dev_id != 0) {
                  set_gdma_dev(free_ch + 1, dev_id);
                  dev_id = free_ch + 1;
            }
            /* Disable the 1510 compatibility mode and set the sync device
             * id. */
            OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
      } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
            OMAP_DMA_CCR_REG(free_ch) = dev_id;
      }

      if (cpu_class_is_omap2()) {
            omap2_enable_irq_lch(free_ch);

            omap_enable_channel_irq(free_ch);
            /* Clear the CSR register and IRQ status register */
            OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
            omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
      }

      *dma_ch_out = free_ch;

      return 0;
}

void omap_free_dma(int lch)
{
      unsigned long flags;

      spin_lock_irqsave(&dma_chan_lock, flags);
      if (dma_chan[lch].dev_id == -1) {
            printk("omap_dma: trying to free nonallocated DMA channel %d\n",
                   lch);
            spin_unlock_irqrestore(&dma_chan_lock, flags);
            return;
      }
      dma_chan[lch].dev_id = -1;
      dma_chan[lch].next_lch = -1;
      dma_chan[lch].callback = NULL;
      spin_unlock_irqrestore(&dma_chan_lock, flags);

      if (cpu_class_is_omap1()) {
            /* Disable all DMA interrupts for the channel. */
            OMAP_DMA_CICR_REG(lch) = 0;
            /* Make sure the DMA transfer is stopped. */
            OMAP_DMA_CCR_REG(lch) = 0;
      }

      if (cpu_class_is_omap2()) {
            u32 val;
            /* Disable interrupts */
            val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
            val &= ~(1 << lch);
            omap_writel(val, OMAP_DMA4_IRQENABLE_L0);

            /* Clear the CSR register and IRQ status register */
            OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
            omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);

            /* Disable all DMA interrupts for the channel. */
            OMAP_DMA_CICR_REG(lch) = 0;

            /* Make sure the DMA transfer is stopped. */
            OMAP_DMA_CCR_REG(lch) = 0;
            omap_clear_dma(lch);
      }
}

/**
 * @brief omap_dma_set_global_params : Set global priority settings for dma
 *
 * @param arb_rate
 * @param max_fifo_depth
 * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
 *                                      DMA_THREAD_RESERVE_ONET
 *                                      DMA_THREAD_RESERVE_TWOT
 *                                      DMA_THREAD_RESERVE_THREET
 */
void
omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
{
      u32 reg;

      if (!cpu_class_is_omap2()) {
            printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
            return;
      }

      if (arb_rate == 0)
            arb_rate = 1;

      reg = (arb_rate & 0xff) << 16;
      reg |= (0xff & max_fifo_depth);

      omap_writel(reg, OMAP_DMA4_GCR_REG);
}
EXPORT_SYMBOL(omap_dma_set_global_params);

/**
 * @brief omap_dma_set_prio_lch : Set channel wise priority settings
 *
 * @param lch
 * @param read_prio - Read priority
 * @param write_prio - Write priority
 * Both of the above can be set with one of the following values :
 *    DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
 */
int
omap_dma_set_prio_lch(int lch, unsigned char read_prio,
                  unsigned char write_prio)
{
      u32 w;

      if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid channel id\n");
            return -EINVAL;
      }
      w = OMAP_DMA_CCR_REG(lch);
      w &= ~((1 << 6) | (1 << 26));
      if (cpu_is_omap2430() || cpu_is_omap34xx())
            w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
      else
            w |= ((read_prio & 0x1) << 6);

      OMAP_DMA_CCR_REG(lch) = w;
      return 0;
}
EXPORT_SYMBOL(omap_dma_set_prio_lch);

/*
 * Clears any DMA state so the DMA engine is ready to restart with new buffers
 * through omap_start_dma(). Any buffers in flight are discarded.
 */
void omap_clear_dma(int lch)
{
      unsigned long flags;

      local_irq_save(flags);

      if (cpu_class_is_omap1()) {
            int status;
            OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;

            /* Clear pending interrupts */
            status = OMAP_DMA_CSR_REG(lch);
      }

      if (cpu_class_is_omap2()) {
            int i;
            u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80;
            for (i = 0; i < 0x44; i += 4)
                  omap_writel(0, lch_base + i);
      }

      local_irq_restore(flags);
}

void omap_start_dma(int lch)
{
      if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
            int next_lch, cur_lch;
            char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];

            dma_chan_link_map[lch] = 1;
            /* Set the link register of the first channel */
            enable_lnk(lch);

            memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
            cur_lch = dma_chan[lch].next_lch;
            do {
                  next_lch = dma_chan[cur_lch].next_lch;

                  /* The loop case: we've been here already */
                  if (dma_chan_link_map[cur_lch])
                        break;
                  /* Mark the current channel */
                  dma_chan_link_map[cur_lch] = 1;

                  enable_lnk(cur_lch);
                  omap_enable_channel_irq(cur_lch);

                  cur_lch = next_lch;
            } while (next_lch != -1);
      } else if (cpu_class_is_omap2()) {
            /* Errata: Need to write lch even if not using chaining */
            OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
      }

      omap_enable_channel_irq(lch);

      /* Errata: On ES2.0 BUFFERING disable must be set.
       * This will always fail on ES1.0 */
      if (cpu_is_omap24xx()) {
            OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
      }

      OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;

      dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}

void omap_stop_dma(int lch)
{
      if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
            int next_lch, cur_lch = lch;
            char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];

            memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
            do {
                  /* The loop case: we've been here already */
                  if (dma_chan_link_map[cur_lch])
                        break;
                  /* Mark the current channel */
                  dma_chan_link_map[cur_lch] = 1;

                  disable_lnk(cur_lch);

                  next_lch = dma_chan[cur_lch].next_lch;
                  cur_lch = next_lch;
            } while (next_lch != -1);

            return;
      }

      /* Disable all interrupts on the channel */
      if (cpu_class_is_omap1())
            OMAP_DMA_CICR_REG(lch) = 0;

      OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
      dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}

/*
 * Allows changing the DMA callback function or data. This may be needed if
 * the driver shares a single DMA channel for multiple dma triggers.
 */
int omap_set_dma_callback(int lch,
                    void (* callback)(int lch, u16 ch_status, void *data),
                    void *data)
{
      unsigned long flags;

      if (lch < 0)
            return -ENODEV;

      spin_lock_irqsave(&dma_chan_lock, flags);
      if (dma_chan[lch].dev_id == -1) {
            printk(KERN_ERR "DMA callback for not set for free channel\n");
            spin_unlock_irqrestore(&dma_chan_lock, flags);
            return -EINVAL;
      }
      dma_chan[lch].callback = callback;
      dma_chan[lch].data = data;
      spin_unlock_irqrestore(&dma_chan_lock, flags);

      return 0;
}

/*
 * Returns current physical source address for the given DMA channel.
 * If the channel is running the caller must disable interrupts prior calling
 * this function and process the returned value before re-enabling interrupt to
 * prevent races with the interrupt handler. Note that in continuous mode there
 * is a chance for CSSA_L register overflow inbetween the two reads resulting
 * in incorrect return value.
 */
dma_addr_t omap_get_dma_src_pos(int lch)
{
      dma_addr_t offset = 0;

      if (cpu_class_is_omap1())
            offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
                               (OMAP1_DMA_CSSA_U_REG(lch) << 16));

      if (cpu_class_is_omap2())
            offset = OMAP_DMA_CSAC_REG(lch);

      return offset;
}

/*
 * Returns current physical destination address for the given DMA channel.
 * If the channel is running the caller must disable interrupts prior calling
 * this function and process the returned value before re-enabling interrupt to
 * prevent races with the interrupt handler. Note that in continuous mode there
 * is a chance for CDSA_L register overflow inbetween the two reads resulting
 * in incorrect return value.
 */
dma_addr_t omap_get_dma_dst_pos(int lch)
{
      dma_addr_t offset = 0;

      if (cpu_class_is_omap1())
            offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
                               (OMAP1_DMA_CDSA_U_REG(lch) << 16));

      if (cpu_class_is_omap2())
            offset = OMAP_DMA_CDAC_REG(lch);

      return offset;
}

/*
 * Returns current source transfer counting for the given DMA channel.
 * Can be used to monitor the progress of a transfer inside a block.
 * It must be called with disabled interrupts.
 */
int omap_get_dma_src_addr_counter(int lch)
{
      return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
}

int omap_dma_running(void)
{
      int lch;

      /* Check if LCD DMA is running */
      if (cpu_is_omap16xx())
            if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
                  return 1;

      for (lch = 0; lch < dma_chan_count; lch++)
            if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
                  return 1;

      return 0;
}

/*
 * lch_queue DMA will start right after lch_head one is finished.
 * For this DMA link to start, you still need to start (see omap_start_dma)
 * the first one. That will fire up the entire queue.
 */
void omap_dma_link_lch (int lch_head, int lch_queue)
{
      if (omap_dma_in_1510_mode()) {
            printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
            BUG();
            return;
      }

      if ((dma_chan[lch_head].dev_id == -1) ||
          (dma_chan[lch_queue].dev_id == -1)) {
            printk(KERN_ERR "omap_dma: trying to link "
                   "non requested channels\n");
            dump_stack();
      }

      dma_chan[lch_head].next_lch = lch_queue;
}

/*
 * Once the DMA queue is stopped, we can destroy it.
 */
void omap_dma_unlink_lch (int lch_head, int lch_queue)
{
      if (omap_dma_in_1510_mode()) {
            printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
            BUG();
            return;
      }

      if (dma_chan[lch_head].next_lch != lch_queue ||
          dma_chan[lch_head].next_lch == -1) {
            printk(KERN_ERR "omap_dma: trying to unlink "
                   "non linked channels\n");
            dump_stack();
      }


      if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
          (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
            printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
                   "before unlinking\n");
            dump_stack();
      }

      dma_chan[lch_head].next_lch = -1;
}

#ifndef CONFIG_ARCH_OMAP1
/* Create chain of DMA channesls */
static void create_dma_lch_chain(int lch_head, int lch_queue)
{
      u32 w;

      /* Check if this is the first link in chain */
      if (dma_chan[lch_head].next_linked_ch == -1) {
            dma_chan[lch_head].next_linked_ch = lch_queue;
            dma_chan[lch_head].prev_linked_ch = lch_queue;
            dma_chan[lch_queue].next_linked_ch = lch_head;
            dma_chan[lch_queue].prev_linked_ch = lch_head;
      }

      /* a link exists, link the new channel in circular chain */
      else {
            dma_chan[lch_queue].next_linked_ch =
                              dma_chan[lch_head].next_linked_ch;
            dma_chan[lch_queue].prev_linked_ch = lch_head;
            dma_chan[lch_head].next_linked_ch = lch_queue;
            dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
                              lch_queue;
      }

      w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
      w &= ~(0x1f);
      w |= lch_queue;
      OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;

      w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
      w &= ~(0x1f);
      w |= (dma_chan[lch_queue].next_linked_ch);
      OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
}

/**
 * @brief omap_request_dma_chain : Request a chain of DMA channels
 *
 * @param dev_id - Device id using the dma channel
 * @param dev_name - Device name
 * @param callback - Call back function
 * @chain_id -
 * @no_of_chans - Number of channels requested
 * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
 *                                  OMAP_DMA_DYNAMIC_CHAIN
 * @params - Channel parameters
 *
 * @return - Succes : 0
 *         Failure: -EINVAL/-ENOMEM
 */
int omap_request_dma_chain(int dev_id, const char *dev_name,
                     void (*callback) (int chain_id, u16 ch_status,
                                   void *data),
                     int *chain_id, int no_of_chans, int chain_mode,
                     struct omap_dma_channel_params params)
{
      int *channels;
      int i, err;

      /* Is the chain mode valid ? */
      if (chain_mode != OMAP_DMA_STATIC_CHAIN
                  && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
            printk(KERN_ERR "Invalid chain mode requested\n");
            return -EINVAL;
      }

      if (unlikely((no_of_chans < 1
                  || no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid Number of channels requested\n");
            return -EINVAL;
      }

      /* Allocate a queue to maintain the status of the channels
       * in the chain */
      channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
      if (channels == NULL) {
            printk(KERN_ERR "omap_dma: No memory for channel queue\n");
            return -ENOMEM;
      }

      /* request and reserve DMA channels for the chain */
      for (i = 0; i < no_of_chans; i++) {
            err = omap_request_dma(dev_id, dev_name,
                              callback, 0, &channels[i]);
            if (err < 0) {
                  int j;
                  for (j = 0; j < i; j++)
                        omap_free_dma(channels[j]);
                  kfree(channels);
                  printk(KERN_ERR "omap_dma: Request failed %d\n", err);
                  return err;
            }
            dma_chan[channels[i]].prev_linked_ch = -1;
            dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;

            /*
             * Allowing client drivers to set common parameters now,
             * so that later only relevant (src_start, dest_start
             * and element count) can be set
             */
            omap_set_dma_params(channels[i], &params);
      }

      *chain_id = channels[0];
      dma_linked_lch[*chain_id].linked_dmach_q = channels;
      dma_linked_lch[*chain_id].chain_mode = chain_mode;
      dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
      dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;

      for (i = 0; i < no_of_chans; i++)
            dma_chan[channels[i]].chain_id = *chain_id;

      /* Reset the Queue pointers */
      OMAP_DMA_CHAIN_QINIT(*chain_id);

      /* Set up the chain */
      if (no_of_chans == 1)
            create_dma_lch_chain(channels[0], channels[0]);
      else {
            for (i = 0; i < (no_of_chans - 1); i++)
                  create_dma_lch_chain(channels[i], channels[i + 1]);
      }
      return 0;
}
EXPORT_SYMBOL(omap_request_dma_chain);

/**
 * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
 * params after setting it. Dont do this while dma is running!!
 *
 * @param chain_id - Chained logical channel id.
 * @param params
 *
 * @return - Success : 0
 *         Failure : -EINVAL
 */
int omap_modify_dma_chain_params(int chain_id,
                        struct omap_dma_channel_params params)
{
      int *channels;
      u32 i;

      /* Check for input params */
      if (unlikely((chain_id < 0
                  || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }
      channels = dma_linked_lch[chain_id].linked_dmach_q;

      for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
            /*
             * Allowing client drivers to set common parameters now,
             * so that later only relevant (src_start, dest_start
             * and element count) can be set
             */
            omap_set_dma_params(channels[i], &params);
      }
      return 0;
}
EXPORT_SYMBOL(omap_modify_dma_chain_params);

/**
 * @brief omap_free_dma_chain - Free all the logical channels in a chain.
 *
 * @param chain_id
 *
 * @return - Success : 0
 *         Failure : -EINVAL
 */
int omap_free_dma_chain(int chain_id)
{
      int *channels;
      u32 i;

      /* Check for input params */
      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }

      channels = dma_linked_lch[chain_id].linked_dmach_q;
      for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
            dma_chan[channels[i]].next_linked_ch = -1;
            dma_chan[channels[i]].prev_linked_ch = -1;
            dma_chan[channels[i]].chain_id = -1;
            dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
            omap_free_dma(channels[i]);
      }

      kfree(channels);

      dma_linked_lch[chain_id].linked_dmach_q = NULL;
      dma_linked_lch[chain_id].chain_mode = -1;
      dma_linked_lch[chain_id].chain_state = -1;
      return (0);
}
EXPORT_SYMBOL(omap_free_dma_chain);

/**
 * @brief omap_dma_chain_status - Check if the chain is in
 * active / inactive state.
 * @param chain_id
 *
 * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
 *         Failure : -EINVAL
 */
int omap_dma_chain_status(int chain_id)
{
      /* Check for input params */
      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }
      pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
                  dma_linked_lch[chain_id].q_count);

      if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
            return OMAP_DMA_CHAIN_INACTIVE;
      return OMAP_DMA_CHAIN_ACTIVE;
}
EXPORT_SYMBOL(omap_dma_chain_status);

/**
 * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
 * set the params and start the transfer.
 *
 * @param chain_id
 * @param src_start - buffer start address
 * @param dest_start - Dest address
 * @param elem_count
 * @param frame_count
 * @param callbk_data - channel callback parameter data.
 *
 * @return  - Success : 0
 *          Failure: -EINVAL/-EBUSY
 */
int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
                  int elem_count, int frame_count, void *callbk_data)
{
      int *channels;
      u32 w, lch;
      int start_dma = 0;

      /* if buffer size is less than 1 then there is
       * no use of starting the chain */
      if (elem_count < 1) {
            printk(KERN_ERR "Invalid buffer size\n");
            return -EINVAL;
      }

      /* Check for input params */
      if (unlikely((chain_id < 0
                  || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exist\n");
            return -EINVAL;
      }

      /* Check if all the channels in chain are in use */
      if (OMAP_DMA_CHAIN_QFULL(chain_id))
            return -EBUSY;

      /* Frame count may be negative in case of indexed transfers */
      channels = dma_linked_lch[chain_id].linked_dmach_q;

      /* Get a free channel */
      lch = channels[dma_linked_lch[chain_id].q_tail];

      /* Store the callback data */
      dma_chan[lch].data = callbk_data;

      /* Increment the q_tail */
      OMAP_DMA_CHAIN_INCQTAIL(chain_id);

      /* Set the params to the free channel */
      if (src_start != 0)
            OMAP2_DMA_CSSA_REG(lch) = src_start;
      if (dest_start != 0)
            OMAP2_DMA_CDSA_REG(lch) = dest_start;

      /* Write the buffer size */
      OMAP_DMA_CEN_REG(lch) = elem_count;
      OMAP_DMA_CFN_REG(lch) = frame_count;

      /* If the chain is dynamically linked,
       * then we may have to start the chain if its not active */
      if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {

            /* In Dynamic chain, if the chain is not started,
             * queue the channel */
            if (dma_linked_lch[chain_id].chain_state ==
                                    DMA_CHAIN_NOTSTARTED) {
                  /* Enable the link in previous channel */
                  if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
                                                DMA_CH_QUEUED)
                        enable_lnk(dma_chan[lch].prev_linked_ch);
                  dma_chan[lch].state = DMA_CH_QUEUED;
            }

            /* Chain is already started, make sure its active,
             * if not then start the chain */
            else {
                  start_dma = 1;

                  if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
                                          DMA_CH_STARTED) {
                        enable_lnk(dma_chan[lch].prev_linked_ch);
                        dma_chan[lch].state = DMA_CH_QUEUED;
                        start_dma = 0;
                        if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG
                              (dma_chan[lch].prev_linked_ch)))) {
                              disable_lnk(dma_chan[lch].
                                        prev_linked_ch);
                              pr_debug("\n prev ch is stopped\n");
                              start_dma = 1;
                        }
                  }

                  else if (dma_chan[dma_chan[lch].prev_linked_ch].state
                                          == DMA_CH_QUEUED) {
                        enable_lnk(dma_chan[lch].prev_linked_ch);
                        dma_chan[lch].state = DMA_CH_QUEUED;
                        start_dma = 0;
                  }
                  omap_enable_channel_irq(lch);

                  w = OMAP_DMA_CCR_REG(lch);

                  if ((0 == (w & (1 << 24))))
                        w &= ~(1 << 25);
                  else
                        w |= (1 << 25);
                  if (start_dma == 1) {
                        if (0 == (w & (1 << 7))) {
                              w |= (1 << 7);
                              dma_chan[lch].state = DMA_CH_STARTED;
                              pr_debug("starting %d\n", lch);
                              OMAP_DMA_CCR_REG(lch) = w;
                        } else
                              start_dma = 0;
                  } else {
                        if (0 == (w & (1 << 7)))
                              OMAP_DMA_CCR_REG(lch) = w;
                  }
                  dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
            }
      }
      return 0;
}
EXPORT_SYMBOL(omap_dma_chain_a_transfer);

/**
 * @brief omap_start_dma_chain_transfers - Start the chain
 *
 * @param chain_id
 *
 * @return - Success : 0
 *         Failure : -EINVAL/-EBUSY
 */
int omap_start_dma_chain_transfers(int chain_id)
{
      int *channels;
      u32 w, i;

      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      channels = dma_linked_lch[chain_id].linked_dmach_q;

      if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
            printk(KERN_ERR "Chain is already started\n");
            return -EBUSY;
      }

      if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
            for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
                                                      i++) {
                  enable_lnk(channels[i]);
                  omap_enable_channel_irq(channels[i]);
            }
      } else {
            omap_enable_channel_irq(channels[0]);
      }

      w = OMAP_DMA_CCR_REG(channels[0]);
      w |= (1 << 7);
      dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
      dma_chan[channels[0]].state = DMA_CH_STARTED;

      if ((0 == (w & (1 << 24))))
            w &= ~(1 << 25);
      else
            w |= (1 << 25);
      OMAP_DMA_CCR_REG(channels[0]) = w;

      dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
      return 0;
}
EXPORT_SYMBOL(omap_start_dma_chain_transfers);

/**
 * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
 *
 * @param chain_id
 *
 * @return - Success : 0
 *         Failure : EINVAL
 */
int omap_stop_dma_chain_transfers(int chain_id)
{
      int *channels;
      u32 w, i;
      u32 sys_cf;

      /* Check for input params */
      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }
      channels = dma_linked_lch[chain_id].linked_dmach_q;

      /* DMA Errata:
       * Special programming model needed to disable DMA before end of block
       */
      sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG);
      w = sys_cf;
      /* Middle mode reg set no Standby */
      w &= ~((1 << 12)|(1 << 13));
      omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG);

      for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {

            /* Stop the Channel transmission */
            w = OMAP_DMA_CCR_REG(channels[i]);
            w &= ~(1 << 7);
            OMAP_DMA_CCR_REG(channels[i]) = w;

            /* Disable the link in all the channels */
            disable_lnk(channels[i]);
            dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;

      }
      dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;

      /* Reset the Queue pointers */
      OMAP_DMA_CHAIN_QINIT(chain_id);

      /* Errata - put in the old value */
      omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG);
      return 0;
}
EXPORT_SYMBOL(omap_stop_dma_chain_transfers);

/* Get the index of the ongoing DMA in chain */
/**
 * @brief omap_get_dma_chain_index - Get the element and frame index
 * of the ongoing DMA in chain
 *
 * @param chain_id
 * @param ei - Element index
 * @param fi - Frame index
 *
 * @return - Success : 0
 *         Failure : -EINVAL
 */
int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
{
      int lch;
      int *channels;

      /* Check for input params */
      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }
      if ((!ei) || (!fi))
            return -EINVAL;

      channels = dma_linked_lch[chain_id].linked_dmach_q;

      /* Get the current channel */
      lch = channels[dma_linked_lch[chain_id].q_head];

      *ei = OMAP2_DMA_CCEN_REG(lch);
      *fi = OMAP2_DMA_CCFN_REG(lch);

      return 0;
}
EXPORT_SYMBOL(omap_get_dma_chain_index);

/**
 * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
 * ongoing DMA in chain
 *
 * @param chain_id
 *
 * @return - Success : Destination position
 *         Failure : -EINVAL
 */
int omap_get_dma_chain_dst_pos(int chain_id)
{
      int lch;
      int *channels;

      /* Check for input params */
      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }

      channels = dma_linked_lch[chain_id].linked_dmach_q;

      /* Get the current channel */
      lch = channels[dma_linked_lch[chain_id].q_head];

      return (OMAP_DMA_CDAC_REG(lch));
}
EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);

/**
 * @brief omap_get_dma_chain_src_pos - Get the source position
 * of the ongoing DMA in chain
 * @param chain_id
 *
 * @return - Success : Destination position
 *         Failure : -EINVAL
 */
int omap_get_dma_chain_src_pos(int chain_id)
{
      int lch;
      int *channels;

      /* Check for input params */
      if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
            printk(KERN_ERR "Invalid chain id\n");
            return -EINVAL;
      }

      /* Check if the chain exists */
      if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
            printk(KERN_ERR "Chain doesn't exists\n");
            return -EINVAL;
      }

      channels = dma_linked_lch[chain_id].linked_dmach_q;

      /* Get the current channel */
      lch = channels[dma_linked_lch[chain_id].q_head];

      return (OMAP_DMA_CSAC_REG(lch));
}
EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
#endif

/*----------------------------------------------------------------------------*/

#ifdef CONFIG_ARCH_OMAP1

static int omap1_dma_handle_ch(int ch)
{
      u16 csr;

      if (enable_1510_mode && ch >= 6) {
            csr = dma_chan[ch].saved_csr;
            dma_chan[ch].saved_csr = 0;
      } else
            csr = OMAP_DMA_CSR_REG(ch);
      if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
            dma_chan[ch + 6].saved_csr = csr >> 7;
            csr &= 0x7f;
      }
      if ((csr & 0x3f) == 0)
            return 0;
      if (unlikely(dma_chan[ch].dev_id == -1)) {
            printk(KERN_WARNING "Spurious interrupt from DMA channel "
                   "%d (CSR %04x)\n", ch, csr);
            return 0;
      }
      if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
            printk(KERN_WARNING "DMA timeout with device %d\n",
                   dma_chan[ch].dev_id);
      if (unlikely(csr & OMAP_DMA_DROP_IRQ))
            printk(KERN_WARNING "DMA synchronization event drop occurred "
                   "with device %d\n", dma_chan[ch].dev_id);
      if (likely(csr & OMAP_DMA_BLOCK_IRQ))
            dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
      if (likely(dma_chan[ch].callback != NULL))
            dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
      return 1;
}

static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
{
      int ch = ((int) dev_id) - 1;
      int handled = 0;

      for (;;) {
            int handled_now = 0;

            handled_now += omap1_dma_handle_ch(ch);
            if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
                  handled_now += omap1_dma_handle_ch(ch + 6);
            if (!handled_now)
                  break;
            handled += handled_now;
      }

      return handled ? IRQ_HANDLED : IRQ_NONE;
}

#else
#define omap1_dma_irq_handler NULL
#endif

#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)

static int omap2_dma_handle_ch(int ch)
{
      u32 status = OMAP_DMA_CSR_REG(ch);

      if (!status) {
            if (printk_ratelimit())
                  printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
            omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
            return 0;
      }
      if (unlikely(dma_chan[ch].dev_id == -1)) {
            if (printk_ratelimit())
                  printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
                              "channel %d\n", status, ch);
            return 0;
      }
      if (unlikely(status & OMAP_DMA_DROP_IRQ))
            printk(KERN_INFO
                   "DMA synchronization event drop occurred with device "
                   "%d\n", dma_chan[ch].dev_id);
      if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
            printk(KERN_INFO "DMA transaction error with device %d\n",
                   dma_chan[ch].dev_id);
      if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
            printk(KERN_INFO "DMA secure error with device %d\n",
                   dma_chan[ch].dev_id);
      if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
            printk(KERN_INFO "DMA misaligned error with device %d\n",
                   dma_chan[ch].dev_id);

      OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
      omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);

      /* If the ch is not chained then chain_id will be -1 */
      if (dma_chan[ch].chain_id != -1) {
            int chain_id = dma_chan[ch].chain_id;
            dma_chan[ch].state = DMA_CH_NOTSTARTED;
            if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15))
                  dma_chan[dma_chan[ch].next_linked_ch].state =
                                          DMA_CH_STARTED;
            if (dma_linked_lch[chain_id].chain_mode ==
                                    OMAP_DMA_DYNAMIC_CHAIN)
                  disable_lnk(ch);

            if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
                  OMAP_DMA_CHAIN_INCQHEAD(chain_id);

            status = OMAP_DMA_CSR_REG(ch);
      }

      if (likely(dma_chan[ch].callback != NULL))
            dma_chan[ch].callback(ch, status, dma_chan[ch].data);

      OMAP_DMA_CSR_REG(ch) = status;

      return 0;
}

/* STATUS register count is from 1-32 while our is 0-31 */
static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
      u32 val;
      int i;

      val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
      if (val == 0) {
            if (printk_ratelimit())
                  printk(KERN_WARNING "Spurious DMA IRQ\n");
            return IRQ_HANDLED;
      }
      for (i = 0; i < OMAP_LOGICAL_DMA_CH_COUNT && val != 0; i++) {
            if (val & 1)
                  omap2_dma_handle_ch(i);
            val >>= 1;
      }

      return IRQ_HANDLED;
}

static struct irqaction omap24xx_dma_irq = {
      .name = "DMA",
      .handler = omap2_dma_irq_handler,
      .flags = IRQF_DISABLED
};

#else
static struct irqaction omap24xx_dma_irq;
#endif

/*----------------------------------------------------------------------------*/

static struct lcd_dma_info {
      spinlock_t lock;
      int reserved;
      void (* callback)(u16 status, void *data);
      void *cb_data;

      int active;
      unsigned long addr, size;
      int rotate, data_type, xres, yres;
      int vxres;
      int mirror;
      int xscale, yscale;
      int ext_ctrl;
      int src_port;
      int single_transfer;
} lcd_dma;

void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
                   int data_type)
{
      lcd_dma.addr = addr;
      lcd_dma.data_type = data_type;
      lcd_dma.xres = fb_xres;
      lcd_dma.yres = fb_yres;
}

void omap_set_lcd_dma_src_port(int port)
{
      lcd_dma.src_port = port;
}

void omap_set_lcd_dma_ext_controller(int external)
{
      lcd_dma.ext_ctrl = external;
}

void omap_set_lcd_dma_single_transfer(int single)
{
      lcd_dma.single_transfer = single;
}


void omap_set_lcd_dma_b1_rotation(int rotate)
{
      if (omap_dma_in_1510_mode()) {
            printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
            BUG();
            return;
      }
      lcd_dma.rotate = rotate;
}

void omap_set_lcd_dma_b1_mirror(int mirror)
{
      if (omap_dma_in_1510_mode()) {
            printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
            BUG();
      }
      lcd_dma.mirror = mirror;
}

void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
      if (omap_dma_in_1510_mode()) {
            printk(KERN_ERR "DMA virtual resulotion is not supported "
                        "in 1510 mode\n");
            BUG();
      }
      lcd_dma.vxres = vxres;
}

void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
{
      if (omap_dma_in_1510_mode()) {
            printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
            BUG();
      }
      lcd_dma.xscale = xscale;
      lcd_dma.yscale = yscale;
}

static void set_b1_regs(void)
{
      unsigned long top, bottom;
      int es;
      u16 w;
      unsigned long en, fn;
      long ei, fi;
      unsigned long vxres;
      unsigned int xscale, yscale;

      switch (lcd_dma.data_type) {
      case OMAP_DMA_DATA_TYPE_S8:
            es = 1;
            break;
      case OMAP_DMA_DATA_TYPE_S16:
            es = 2;
            break;
      case OMAP_DMA_DATA_TYPE_S32:
            es = 4;
            break;
      default:
            BUG();
            return;
      }

      vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
      xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
      yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
      BUG_ON(vxres < lcd_dma.xres);
#define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es)
#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
      switch (lcd_dma.rotate) {
      case 0:
            if (!lcd_dma.mirror) {
                  top = PIXADDR(0, 0);
                  bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
                  /* 1510 DMA requires the bottom address to be 2 more
                   * than the actual last memory access location. */
                  if (omap_dma_in_1510_mode() &&
                      lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
                        bottom += 2;
                  ei = PIXSTEP(0, 0, 1, 0);
                  fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
            } else {
                  top = PIXADDR(lcd_dma.xres - 1, 0);
                  bottom = PIXADDR(0, lcd_dma.yres - 1);
                  ei = PIXSTEP(1, 0, 0, 0);
                  fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
            }
            en = lcd_dma.xres;
            fn = lcd_dma.yres;
            break;
      case 90:
            if (!lcd_dma.mirror) {
                  top = PIXADDR(0, lcd_dma.yres - 1);
                  bottom = PIXADDR(lcd_dma.xres - 1, 0);
                  ei = PIXSTEP(0, 1, 0, 0);
                  fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
            } else {
                  top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
                  bottom = PIXADDR(0, 0);
                  ei = PIXSTEP(0, 1, 0, 0);
                  fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
            }
            en = lcd_dma.yres;
            fn = lcd_dma.xres;
            break;
      case 180:
            if (!lcd_dma.mirror) {
                  top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
                  bottom = PIXADDR(0, 0);
                  ei = PIXSTEP(1, 0, 0, 0);
                  fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
            } else {
                  top = PIXADDR(0, lcd_dma.yres - 1);
                  bottom = PIXADDR(lcd_dma.xres - 1, 0);
                  ei = PIXSTEP(0, 0, 1, 0);
                  fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
            }
            en = lcd_dma.xres;
            fn = lcd_dma.yres;
            break;
      case 270:
            if (!lcd_dma.mirror) {
                  top = PIXADDR(lcd_dma.xres - 1, 0);
                  bottom = PIXADDR(0, lcd_dma.yres - 1);
                  ei = PIXSTEP(0, 0, 0, 1);
                  fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
            } else {
                  top = PIXADDR(0, 0);
                  bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
                  ei = PIXSTEP(0, 0, 0, 1);
                  fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
            }
            en = lcd_dma.yres;
            fn = lcd_dma.xres;
            break;
      default:
            BUG();
            return;     /* Suppress warning about uninitialized vars */
      }

      if (omap_dma_in_1510_mode()) {
            omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
            omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
            omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
            omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);

            return;
      }

      /* 1610 regs */
      omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
      omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
      omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
      omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);

      omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
      omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);

      w = omap_readw(OMAP1610_DMA_LCD_CSDP);
      w &= ~0x03;
      w |= lcd_dma.data_type;
      omap_writew(w, OMAP1610_DMA_LCD_CSDP);

      w = omap_readw(OMAP1610_DMA_LCD_CTRL);
      /* Always set the source port as SDRAM for now*/
      w &= ~(0x03 << 6);
      if (lcd_dma.callback != NULL)
            w |= 1 << 1;            /* Block interrupt enable */
      else
            w &= ~(1 << 1);
      omap_writew(w, OMAP1610_DMA_LCD_CTRL);

      if (!(lcd_dma.rotate || lcd_dma.mirror ||
            lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
            return;

      w = omap_readw(OMAP1610_DMA_LCD_CCR);
      /* Set the double-indexed addressing mode */
      w |= (0x03 << 12);
      omap_writew(w, OMAP1610_DMA_LCD_CCR);

      omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
      omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
      omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
}

static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
{
      u16 w;

      w = omap_readw(OMAP1610_DMA_LCD_CTRL);
      if (unlikely(!(w & (1 << 3)))) {
            printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
            return IRQ_NONE;
      }
      /* Ack the IRQ */
      w |= (1 << 3);
      omap_writew(w, OMAP1610_DMA_LCD_CTRL);
      lcd_dma.active = 0;
      if (lcd_dma.callback != NULL)
            lcd_dma.callback(w, lcd_dma.cb_data);

      return IRQ_HANDLED;
}

int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
                   void *data)
{
      spin_lock_irq(&lcd_dma.lock);
      if (lcd_dma.reserved) {
            spin_unlock_irq(&lcd_dma.lock);
            printk(KERN_ERR "LCD DMA channel already reserved\n");
            BUG();
            return -EBUSY;
      }
      lcd_dma.reserved = 1;
      spin_unlock_irq(&lcd_dma.lock);
      lcd_dma.callback = callback;
      lcd_dma.cb_data = data;
      lcd_dma.active = 0;
      lcd_dma.single_transfer = 0;
      lcd_dma.rotate = 0;
      lcd_dma.vxres = 0;
      lcd_dma.mirror = 0;
      lcd_dma.xscale = 0;
      lcd_dma.yscale = 0;
      lcd_dma.ext_ctrl = 0;
      lcd_dma.src_port = 0;

      return 0;
}

void omap_free_lcd_dma(void)
{
      spin_lock(&lcd_dma.lock);
      if (!lcd_dma.reserved) {
            spin_unlock(&lcd_dma.lock);
            printk(KERN_ERR "LCD DMA is not reserved\n");
            BUG();
            return;
      }
      if (!enable_1510_mode)
            omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
                      OMAP1610_DMA_LCD_CCR);
      lcd_dma.reserved = 0;
      spin_unlock(&lcd_dma.lock);
}

void omap_enable_lcd_dma(void)
{
      u16 w;

      /* Set the Enable bit only if an external controller is
       * connected. Otherwise the OMAP internal controller will
       * start the transfer when it gets enabled.
       */
      if (enable_1510_mode || !lcd_dma.ext_ctrl)
            return;

      w = omap_readw(OMAP1610_DMA_LCD_CTRL);
      w |= 1 << 8;
      omap_writew(w, OMAP1610_DMA_LCD_CTRL);

      lcd_dma.active = 1;

      w = omap_readw(OMAP1610_DMA_LCD_CCR);
      w |= 1 << 7;
      omap_writew(w, OMAP1610_DMA_LCD_CCR);
}

void omap_setup_lcd_dma(void)
{
      BUG_ON(lcd_dma.active);
      if (!enable_1510_mode) {
            /* Set some reasonable defaults */
            omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
            omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
            omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
      }
      set_b1_regs();
      if (!enable_1510_mode) {
            u16 w;

            w = omap_readw(OMAP1610_DMA_LCD_CCR);
            /* If DMA was already active set the end_prog bit to have
             * the programmed register set loaded into the active
             * register set.
             */
            w |= 1 << 11;           /* End_prog */
            if (!lcd_dma.single_transfer)
                  w |= (3 << 8);    /* Auto_init, repeat */
            omap_writew(w, OMAP1610_DMA_LCD_CCR);
      }
}

void omap_stop_lcd_dma(void)
{
      u16 w;

      lcd_dma.active = 0;
      if (enable_1510_mode || !lcd_dma.ext_ctrl)
            return;

      w = omap_readw(OMAP1610_DMA_LCD_CCR);
      w &= ~(1 << 7);
      omap_writew(w, OMAP1610_DMA_LCD_CCR);

      w = omap_readw(OMAP1610_DMA_LCD_CTRL);
      w &= ~(1 << 8);
      omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}

/*----------------------------------------------------------------------------*/

static int __init omap_init_dma(void)
{
      int ch, r;

      if (cpu_is_omap15xx()) {
            printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
            dma_chan_count = 9;
            enable_1510_mode = 1;
      } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
            printk(KERN_INFO "OMAP DMA hardware version %d\n",
                   omap_readw(OMAP_DMA_HW_ID));
            printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
                   (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
                   omap_readw(OMAP_DMA_CAPS_0_L),
                   (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
                   omap_readw(OMAP_DMA_CAPS_1_L),
                   omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
                   omap_readw(OMAP_DMA_CAPS_4));
            if (!enable_1510_mode) {
                  u16 w;

                  /* Disable OMAP 3.0/3.1 compatibility mode. */
                  w = omap_readw(OMAP_DMA_GSCR);
                  w |= 1 << 3;
                  omap_writew(w, OMAP_DMA_GSCR);
                  dma_chan_count = 16;
            } else
                  dma_chan_count = 9;
            if (cpu_is_omap16xx()) {
                  u16 w;

                  /* this would prevent OMAP sleep */
                  w = omap_readw(OMAP1610_DMA_LCD_CTRL);
                  w &= ~(1 << 8);
                  omap_writew(w, OMAP1610_DMA_LCD_CTRL);
            }
      } else if (cpu_class_is_omap2()) {
            u8 revision = omap_readb(OMAP_DMA4_REVISION);
            printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
                   revision >> 4, revision & 0xf);
            dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
      } else {
            dma_chan_count = 0;
            return 0;
      }

      memset(&lcd_dma, 0, sizeof(lcd_dma));
      spin_lock_init(&lcd_dma.lock);
      spin_lock_init(&dma_chan_lock);
      memset(&dma_chan, 0, sizeof(dma_chan));

      for (ch = 0; ch < dma_chan_count; ch++) {
            omap_clear_dma(ch);
            dma_chan[ch].dev_id = -1;
            dma_chan[ch].next_lch = -1;

            if (ch >= 6 && enable_1510_mode)
                  continue;

            if (cpu_class_is_omap1()) {
                  /* request_irq() doesn't like dev_id (ie. ch) being
                   * zero, so we have to kludge around this. */
                  r = request_irq(omap1_dma_irq[ch],
                              omap1_dma_irq_handler, 0, "DMA",
                              (void *) (ch + 1));
                  if (r != 0) {
                        int i;

                        printk(KERN_ERR "unable to request IRQ %d "
                               "for DMA (error %d)\n",
                               omap1_dma_irq[ch], r);
                        for (i = 0; i < ch; i++)
                              free_irq(omap1_dma_irq[i],
                                     (void *) (i + 1));
                        return r;
                  }
            }
      }

      if (cpu_is_omap2430() || cpu_is_omap34xx())
            omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
                        DMA_DEFAULT_FIFO_DEPTH, 0);

      if (cpu_class_is_omap2())
            setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);

      /* FIXME: Update LCD DMA to work on 24xx */
      if (cpu_class_is_omap1()) {
            r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
                        "LCD DMA", NULL);
            if (r != 0) {
                  int i;

                  printk(KERN_ERR "unable to request IRQ for LCD DMA "
                         "(error %d)\n", r);
                  for (i = 0; i < dma_chan_count; i++)
                        free_irq(omap1_dma_irq[i], (void *) (i + 1));
                  return r;
            }
      }

      return 0;
}

arch_initcall(omap_init_dma);

EXPORT_SYMBOL(omap_get_dma_src_pos);
EXPORT_SYMBOL(omap_get_dma_dst_pos);
EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
EXPORT_SYMBOL(omap_clear_dma);
EXPORT_SYMBOL(omap_set_dma_priority);
EXPORT_SYMBOL(omap_request_dma);
EXPORT_SYMBOL(omap_free_dma);
EXPORT_SYMBOL(omap_start_dma);
EXPORT_SYMBOL(omap_stop_dma);
EXPORT_SYMBOL(omap_set_dma_callback);
EXPORT_SYMBOL(omap_enable_dma_irq);
EXPORT_SYMBOL(omap_disable_dma_irq);

EXPORT_SYMBOL(omap_set_dma_transfer_params);
EXPORT_SYMBOL(omap_set_dma_color_mode);
EXPORT_SYMBOL(omap_set_dma_write_mode);

EXPORT_SYMBOL(omap_set_dma_src_params);
EXPORT_SYMBOL(omap_set_dma_src_index);
EXPORT_SYMBOL(omap_set_dma_src_data_pack);
EXPORT_SYMBOL(omap_set_dma_src_burst_mode);

EXPORT_SYMBOL(omap_set_dma_dest_params);
EXPORT_SYMBOL(omap_set_dma_dest_index);
EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);

EXPORT_SYMBOL(omap_set_dma_params);

EXPORT_SYMBOL(omap_dma_link_lch);
EXPORT_SYMBOL(omap_dma_unlink_lch);

EXPORT_SYMBOL(omap_request_lcd_dma);
EXPORT_SYMBOL(omap_free_lcd_dma);
EXPORT_SYMBOL(omap_enable_lcd_dma);
EXPORT_SYMBOL(omap_setup_lcd_dma);
EXPORT_SYMBOL(omap_stop_lcd_dma);
EXPORT_SYMBOL(omap_set_lcd_dma_b1);
EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);


Generated by  Doxygen 1.6.0   Back to index