Logo Search packages:      
Sourcecode: linux-2.6 version File versions

sharpsl_pm.c

/*
 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
 * series of PDAs
 *
 * Copyright (c) 2004-2005 Richard Purdie
 *
 * Based on code written by Sharp for 2.4 kernels
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/apm_bios.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/apm-emulation.h>
#include <linux/suspend.h>

#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/pm.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>

/*
 * Constants
 */
#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */

#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */

/*
 * Prototypes
 */
#ifdef CONFIG_PM
static int sharpsl_off_charge_battery(void);
static int sharpsl_check_battery_voltage(void);
static int sharpsl_fatal_check(void);
#endif
static int sharpsl_check_battery_temp(void);
static int sharpsl_ac_check(void);
static int sharpsl_average_value(int ad);
static void sharpsl_average_clear(void);
static void sharpsl_charge_toggle(struct work_struct *private_);
static void sharpsl_battery_thread(struct work_struct *private_);


/*
 * Variables
 */
struct sharpsl_pm_status sharpsl_pm;
DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);


static int get_percentage(int voltage)
{
      int i = sharpsl_pm.machinfo->bat_levels - 1;
      int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
      struct battery_thresh *thresh;

      if (sharpsl_pm.charge_mode == CHRG_ON)
            thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
      else
            thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;

      while (i > 0 && (voltage > thresh[i].voltage))
            i--;

      return thresh[i].percentage;
}

static int get_apm_status(int voltage)
{
      int low_thresh, high_thresh;

      if (sharpsl_pm.charge_mode == CHRG_ON) {
            high_thresh = sharpsl_pm.machinfo->status_high_acin;
            low_thresh = sharpsl_pm.machinfo->status_low_acin;
      } else {
            high_thresh = sharpsl_pm.machinfo->status_high_noac;
            low_thresh = sharpsl_pm.machinfo->status_low_noac;
      }

      if (voltage >= high_thresh)
            return APM_BATTERY_STATUS_HIGH;
      if (voltage >= low_thresh)
            return APM_BATTERY_STATUS_LOW;
      return APM_BATTERY_STATUS_CRITICAL;
}

void sharpsl_battery_kick(void)
{
      schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
}
EXPORT_SYMBOL(sharpsl_battery_kick);


static void sharpsl_battery_thread(struct work_struct *private_)
{
      int voltage, percent, apm_status, i = 0;

      if (!sharpsl_pm.machinfo)
            return;

      sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);

      /* Corgi cannot confirm when battery fully charged so periodically kick! */
      if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
                  && time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
            schedule_delayed_work(&toggle_charger, 0);

      while(1) {
            voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);

            if (voltage > 0) break;
            if (i++ > 5) {
                  voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
                  dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
                  break;
            }
      }

      voltage = sharpsl_average_value(voltage);
      apm_status = get_apm_status(voltage);
      percent = get_percentage(voltage);

      /* At low battery voltages, the voltage has a tendency to start
           creeping back up so we try to avoid this here */
      if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
            sharpsl_pm.battstat.mainbat_voltage = voltage;
            sharpsl_pm.battstat.mainbat_status = apm_status;
            sharpsl_pm.battstat.mainbat_percent = percent;
      }

      dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
                  sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);

#ifdef CONFIG_BACKLIGHT_CORGI
      /* If battery is low. limit backlight intensity to save power. */
      if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
                  && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
                  (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
            if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
                  sharpsl_pm.machinfo->backlight_limit(1);
                  sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
            }
      } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
            sharpsl_pm.machinfo->backlight_limit(0);
            sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
      }
#endif

      /* Suspend if critical battery level */
      if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
                  && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
                  && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
            sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
            dev_err(sharpsl_pm.dev, "Fatal Off\n");
            apm_queue_event(APM_CRITICAL_SUSPEND);
      }

      schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
}

void sharpsl_pm_led(int val)
{
      if (val == SHARPSL_LED_ERROR) {
            dev_err(sharpsl_pm.dev, "Charging Error!\n");
      } else if (val == SHARPSL_LED_ON) {
            dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
            led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
      } else {
            dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
            led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
      }
}

static void sharpsl_charge_on(void)
{
      dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");

      sharpsl_pm.full_count = 0;
      sharpsl_pm.charge_mode = CHRG_ON;
      schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
      schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
}

static void sharpsl_charge_off(void)
{
      dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");

      sharpsl_pm.machinfo->charge(0);
      sharpsl_pm_led(SHARPSL_LED_OFF);
      sharpsl_pm.charge_mode = CHRG_OFF;

      schedule_delayed_work(&sharpsl_bat, 0);
}

static void sharpsl_charge_error(void)
{
      sharpsl_pm_led(SHARPSL_LED_ERROR);
      sharpsl_pm.machinfo->charge(0);
      sharpsl_pm.charge_mode = CHRG_ERROR;
}

static void sharpsl_charge_toggle(struct work_struct *private_)
{
      dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);

      if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
            sharpsl_charge_off();
            return;
      } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
            sharpsl_charge_error();
            return;
      }

      sharpsl_pm_led(SHARPSL_LED_ON);
      sharpsl_pm.machinfo->charge(0);
      mdelay(SHARPSL_CHARGE_WAIT_TIME);
      sharpsl_pm.machinfo->charge(1);

      sharpsl_pm.charge_start_time = jiffies;
}

static void sharpsl_ac_timer(unsigned long data)
{
      int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);

      dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);

      sharpsl_average_clear();
      if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
            sharpsl_charge_on();
      else if (sharpsl_pm.charge_mode == CHRG_ON)
            sharpsl_charge_off();

      schedule_delayed_work(&sharpsl_bat, 0);
}


irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
{
      /* Delay the event slightly to debounce */
      /* Must be a smaller delay than the chrg_full_isr below */
      mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));

      return IRQ_HANDLED;
}

static void sharpsl_chrg_full_timer(unsigned long data)
{
      dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);

      sharpsl_pm.full_count++;

      if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
            dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
            if (sharpsl_pm.charge_mode == CHRG_ON)
                  sharpsl_charge_off();
      } else if (sharpsl_pm.full_count < 2) {
            dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
            schedule_delayed_work(&toggle_charger, 0);
      } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
            dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
            schedule_delayed_work(&toggle_charger, 0);
      } else {
            sharpsl_charge_off();
            sharpsl_pm.charge_mode = CHRG_DONE;
            dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
      }
}

/* Charging Finished Interrupt (Not present on Corgi) */
/* Can trigger at the same time as an AC status change so
   delay until after that has been processed */
irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
{
      if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
            return IRQ_HANDLED;

      /* delay until after any ac interrupt */
      mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));

      return IRQ_HANDLED;
}

irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
{
      int is_fatal = 0;

      if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
            dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
            is_fatal = 1;
      }

      if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
            dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
            is_fatal = 1;
      }

      if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
            sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
            apm_queue_event(APM_CRITICAL_SUSPEND);
      }

      return IRQ_HANDLED;
}

/*
 * Maintain an average of the last 10 readings
 */
#define SHARPSL_CNV_VALUE_NUM    10
static int sharpsl_ad_index;

static void sharpsl_average_clear(void)
{
      sharpsl_ad_index = 0;
}

static int sharpsl_average_value(int ad)
{
      int i, ad_val = 0;
      static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];

      if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
            sharpsl_ad_index = 0;
            return ad;
      }

      sharpsl_ad[sharpsl_ad_index] = ad;
      sharpsl_ad_index++;
      if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
            for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
                  sharpsl_ad[i] = sharpsl_ad[i+1];
            sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
      }
      for (i=0; i < sharpsl_ad_index; i++)
            ad_val += sharpsl_ad[i];

      return (ad_val / sharpsl_ad_index);
}

/*
 * Take an array of 5 integers, remove the maximum and minimum values
 * and return the average.
 */
static int get_select_val(int *val)
{
      int i, j, k, temp, sum = 0;

      /* Find MAX val */
      temp = val[0];
      j=0;
      for (i=1; i<5; i++) {
            if (temp < val[i]) {
                  temp = val[i];
                  j = i;
            }
      }

      /* Find MIN val */
      temp = val[4];
      k=4;
      for (i=3; i>=0; i--) {
            if (temp > val[i]) {
                  temp = val[i];
                  k = i;
            }
      }

      for (i=0; i<5; i++)
            if (i != j && i != k )
                  sum += val[i];

      dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);

      return (sum/3);
}

static int sharpsl_check_battery_temp(void)
{
      int val, i, buff[5];

      /* Check battery temperature */
      for (i=0; i<5; i++) {
            mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
            sharpsl_pm.machinfo->measure_temp(1);
            mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
            buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
            sharpsl_pm.machinfo->measure_temp(0);
      }

      val = get_select_val(buff);

      dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
      if (val > sharpsl_pm.machinfo->charge_on_temp) {
            printk(KERN_WARNING "Not charging: temperature out of limits.\n");
            return -1;
      }

      return 0;
}

#ifdef CONFIG_PM
static int sharpsl_check_battery_voltage(void)
{
      int val, i, buff[5];

      /* disable charge, enable discharge */
      sharpsl_pm.machinfo->charge(0);
      sharpsl_pm.machinfo->discharge(1);
      mdelay(SHARPSL_WAIT_DISCHARGE_ON);

      if (sharpsl_pm.machinfo->discharge1)
            sharpsl_pm.machinfo->discharge1(1);

      /* Check battery voltage */
      for (i=0; i<5; i++) {
            buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
            mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
      }

      if (sharpsl_pm.machinfo->discharge1)
            sharpsl_pm.machinfo->discharge1(0);

      sharpsl_pm.machinfo->discharge(0);

      val = get_select_val(buff);
      dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);

      if (val < sharpsl_pm.machinfo->charge_on_volt)
            return -1;

      return 0;
}
#endif

static int sharpsl_ac_check(void)
{
      int temp, i, buff[5];

      for (i=0; i<5; i++) {
            buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
            mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
      }

      temp = get_select_val(buff);
      dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);

      if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
            dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
            return -1;
      }

      return 0;
}

#ifdef CONFIG_PM
static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
{
      sharpsl_pm.flags |= SHARPSL_SUSPENDED;
      flush_scheduled_work();

      if (sharpsl_pm.charge_mode == CHRG_ON)
            sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
      else
            sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;

      return 0;
}

static int sharpsl_pm_resume(struct platform_device *pdev)
{
      /* Clear the reset source indicators as they break the bootloader upon reboot */
      RCSR = 0x0f;
      sharpsl_average_clear();
      sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
      sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;

      return 0;
}

static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
      dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);

      dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
      /* not charging and AC-IN! */

      if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
            dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
            sharpsl_pm.charge_mode = CHRG_OFF;
            sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
            sharpsl_off_charge_battery();
      }

      sharpsl_pm.machinfo->presuspend();

      PEDR = 0xffffffff; /* clear it */

      sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
      if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
            RTSR &= RTSR_ALE;
            RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
            dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
            sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
      } else if (alarm_enable) {
            RTSR &= RTSR_ALE;
            RTAR = alarm_time;
            dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
      } else {
            dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
      }

      pxa_pm_enter(state);

      sharpsl_pm.machinfo->postsuspend();

      dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
}

static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
      if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
      {
            if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
                  dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
                  corgi_goto_sleep(alarm_time, alarm_enable, state);
                  return 1;
            }
            if(sharpsl_off_charge_battery()) {
                  dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
                  corgi_goto_sleep(alarm_time, alarm_enable, state);
                  return 1;
            }
            dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
      }

      if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
      {
            dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
            corgi_goto_sleep(alarm_time, alarm_enable, state);
            return 1;
      }

      return 0;
}

static int corgi_pxa_pm_enter(suspend_state_t state)
{
      unsigned long alarm_time = RTAR;
      unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);

      dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");

      corgi_goto_sleep(alarm_time, alarm_status, state);

      while (corgi_enter_suspend(alarm_time,alarm_status,state))
            {}

      if (sharpsl_pm.machinfo->earlyresume)
            sharpsl_pm.machinfo->earlyresume();

      dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");

      return 0;
}

/*
 * Check for fatal battery errors
 * Fatal returns -1
 */
static int sharpsl_fatal_check(void)
{
      int buff[5], temp, i, acin;

      dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");

      /* Check AC-Adapter */
      acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);

      if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
            sharpsl_pm.machinfo->charge(0);
            udelay(100);
            sharpsl_pm.machinfo->discharge(1);  /* enable discharge */
            mdelay(SHARPSL_WAIT_DISCHARGE_ON);
      }

      if (sharpsl_pm.machinfo->discharge1)
            sharpsl_pm.machinfo->discharge1(1);

      /* Check battery : check inserting battery ? */
      for (i=0; i<5; i++) {
            buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
            mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
      }

      if (sharpsl_pm.machinfo->discharge1)
            sharpsl_pm.machinfo->discharge1(0);

      if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
            udelay(100);
            sharpsl_pm.machinfo->charge(1);
            sharpsl_pm.machinfo->discharge(0);
      }

      temp = get_select_val(buff);
      dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));

      if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
                  (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
            return -1;
      return 0;
}

static int sharpsl_off_charge_error(void)
{
      dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
      sharpsl_pm.machinfo->charge(0);
      sharpsl_pm_led(SHARPSL_LED_ERROR);
      sharpsl_pm.charge_mode = CHRG_ERROR;
      return 1;
}

/*
 * Charging Control while suspended
 * Return 1 - go straight to sleep
 * Return 0 - sleep or wakeup depending on other factors
 */
static int sharpsl_off_charge_battery(void)
{
      int time;

      dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);

      if (sharpsl_pm.charge_mode == CHRG_OFF) {
            dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");

            /* AC Check */
            if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
                  return sharpsl_off_charge_error();

            /* Start Charging */
            sharpsl_pm_led(SHARPSL_LED_ON);
            sharpsl_pm.machinfo->charge(0);
            mdelay(SHARPSL_CHARGE_WAIT_TIME);
            sharpsl_pm.machinfo->charge(1);

            sharpsl_pm.charge_mode = CHRG_ON;
            sharpsl_pm.full_count = 0;

            return 1;
      } else if (sharpsl_pm.charge_mode != CHRG_ON) {
            return 1;
      }

      if (sharpsl_pm.full_count == 0) {
            int time;

            dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");

            if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
                  return sharpsl_off_charge_error();

            sharpsl_pm.machinfo->charge(0);
            mdelay(SHARPSL_CHARGE_WAIT_TIME);
            sharpsl_pm.machinfo->charge(1);
            sharpsl_pm.charge_mode = CHRG_ON;

            mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);

            time = RCNR;
            while(1) {
                  /* Check if any wakeup event had occurred */
                  if (sharpsl_pm.machinfo->charger_wakeup() != 0)
                        return 0;
                  /* Check for timeout */
                  if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
                        return 1;
                  if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
                        dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
                        sharpsl_pm.full_count++;
                        sharpsl_pm.machinfo->charge(0);
                        mdelay(SHARPSL_CHARGE_WAIT_TIME);
                        sharpsl_pm.machinfo->charge(1);
                        return 1;
                  }
            }
      }

      dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");

      mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);

      time = RCNR;
      while(1) {
            /* Check if any wakeup event had occurred */
            if (sharpsl_pm.machinfo->charger_wakeup() != 0)
                  return 0;
            /* Check for timeout */
            if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
                  if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
                        dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
                        sharpsl_pm.full_count = 0;
                  }
                  sharpsl_pm.full_count++;
                  return 1;
            }
            if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
                  dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
                  sharpsl_pm_led(SHARPSL_LED_OFF);
                  sharpsl_pm.machinfo->charge(0);
                  sharpsl_pm.charge_mode = CHRG_DONE;
                  return 1;
            }
      }
}
#else
#define sharpsl_pm_suspend    NULL
#define sharpsl_pm_resume     NULL
#endif

static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
      return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
}

static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
      return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
}

static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);

extern void (*apm_get_power_status)(struct apm_power_info *);

static void sharpsl_apm_get_power_status(struct apm_power_info *info)
{
      info->ac_line_status = sharpsl_pm.battstat.ac_status;

      if (sharpsl_pm.charge_mode == CHRG_ON)
            info->battery_status = APM_BATTERY_STATUS_CHARGING;
      else
            info->battery_status = sharpsl_pm.battstat.mainbat_status;

      info->battery_flag = (1 << info->battery_status);
      info->battery_life = sharpsl_pm.battstat.mainbat_percent;
}

#ifdef CONFIG_PM
static struct platform_suspend_ops sharpsl_pm_ops = {
      .enter            = corgi_pxa_pm_enter,
      .valid            = suspend_valid_only_mem,
};
#endif

static int __init sharpsl_pm_probe(struct platform_device *pdev)
{
      int ret;

      if (!pdev->dev.platform_data)
            return -EINVAL;

      sharpsl_pm.dev = &pdev->dev;
      sharpsl_pm.machinfo = pdev->dev.platform_data;
      sharpsl_pm.charge_mode = CHRG_OFF;
      sharpsl_pm.flags = 0;

      init_timer(&sharpsl_pm.ac_timer);
      sharpsl_pm.ac_timer.function = sharpsl_ac_timer;

      init_timer(&sharpsl_pm.chrg_full_timer);
      sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;

      led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);

      sharpsl_pm.machinfo->init();

      ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
      ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
      if (ret != 0)
            dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);

      apm_get_power_status = sharpsl_apm_get_power_status;

#ifdef CONFIG_PM
      suspend_set_ops(&sharpsl_pm_ops);
#endif

      mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));

      return 0;
}

static int sharpsl_pm_remove(struct platform_device *pdev)
{
      suspend_set_ops(NULL);

      device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
      device_remove_file(&pdev->dev, &dev_attr_battery_voltage);

      led_trigger_unregister_simple(sharpsl_charge_led_trigger);

      sharpsl_pm.machinfo->exit();

      del_timer_sync(&sharpsl_pm.chrg_full_timer);
      del_timer_sync(&sharpsl_pm.ac_timer);

      return 0;
}

static struct platform_driver sharpsl_pm_driver = {
      .probe            = sharpsl_pm_probe,
      .remove           = sharpsl_pm_remove,
      .suspend    = sharpsl_pm_suspend,
      .resume           = sharpsl_pm_resume,
      .driver           = {
            .name       = "sharpsl-pm",
      },
};

static int __devinit sharpsl_pm_init(void)
{
      return platform_driver_register(&sharpsl_pm_driver);
}

static void sharpsl_pm_exit(void)
{
      platform_driver_unregister(&sharpsl_pm_driver);
}

late_initcall(sharpsl_pm_init);
module_exit(sharpsl_pm_exit);

Generated by  Doxygen 1.6.0   Back to index